Welcome to Vector Technologies

pH Electrodes (General Glass)

Specification

Product Specification	Description
Parameter	pH
Range	0 to 13 pH
Temperature Range	0 to 100 °C
Liquid Junction Type	Annular ceramic
Internal Reference Type	Ag/AgCl
Sealed/Refillable	Refillable
Reference Junction	Single
Refilling Reference Electrolyte	ECRE001
Dimensions (Shaft)	55 x 8 mm
Cable Length	1 m
Connector	BNC
Description	General purpose glass-body pH electrode. Suitable for high viscosity samples where frequent cleaning of reference is required. Comes with 10 ml electrolyte
Used With	All pH meters with BNC input connector

pH Electrodes (General Plastic)

Specification

Product Specification	Description
Parameter	pH
Range	0 to 13 pH
Temperature Range	0 to 80 °C
Liquid Junction Type	Porous HDPE pin
Internal Reference Type	Ag/AgCl
Sealed/Refillable	Sealed
Reference Junction	Single
Refilling Reference Electrolyte	–
Dimensions (Shaft)	90 x 12 mm
Cable Length	1 m
Connector	BNC
Description	General purpose plastic-body pH electrode
Used With	All pH meters with BNC input connector

pH Electrodes (Specialty Open Pore)

Specification

Product Specification	Description
Parameter	pH
Range	0 to 14 pH
Temperature Range	0 to 80 °C
Liquid Junction Type	Open pore
Internal Reference Type	Ag/AgCl
Sealed/Refillable	Refillable
Reference Junction	Double
Refilling Reference Electrolyte	EC636430
Dimensions (Shaft)	140 x 12 mm
Cable Length	1 m
Connector	BNC
Description	Open pore glass-body pH combination electrode for general pH measurements. Comes with 10 ml refilling electrolyte
Used With	All pH meters with BNC input connector

pH Electrodes (Specialty)

Specification

Product Specification	Description
Parameter	pH
Range	0 to 14 pH
Temperature Range	-5 to 100 °C
Liquid Junction Type	Annular ceramic
Internal Reference Type	Ag/AgCl
Sealed/Refillable	Refillable
Reference Junction	Double
Refilling Reference Electrolyte	ECRE002
Dimensions (Shaft)	106 x 10 mm
Cable Length	1 m
Connector	BNC
Description	Fast-responding glass-body electrode with extra rugged bulb design. Suitable for applications where frequent breakage of glass bulbs is a problem, but unsuitable for epoxy electrodes. Comes with 10 ml electrolyte
Used With	All pH meters with BNC input connector

pH/ATC Electrodes (3-in-1)

Specification

Product Specification	Description
Parameter	pH / Temperature
Range	1 to 13 pH
Temperature Range	0 to 80 °C
Liquid Junction Type	Porous HDPE pin
Internal Reference Type	Ag/AgCl
Sealed/Refillable	Sealed
Reference Junction	Single
Refilling Reference Electrolyte	–
Dimensions (Shaft)	90 x 12 mm
Cable Length	1 m
Connector	BNC & 2.5 mm phono
Description	General purpose plastic-body "3-in-1" pH / Temperature combination electrode
Used With	pH 5 / pH 6 / pH 5+ / pH 6+ / pH 11 / pH 110 / pH 510 / pH 700 / pH 1100 / pH 2100 / pH 2700 / Ion 6 / Ion 6+ / Ion 510 / Ion 700 / Ion 2700 / PC 2700

Oxidation Reduction Potential (ORP) Electrodes

Specification

Product Specification	Description
Parameter	Oxidation Reduction Potential (ORP)
Range	-1000 to 1000 mV
Temperature Range	0 to 80 °C
Sensor Type	Platinum pin
Internal Reference Type	Ag/AgCl
Sealed/Refillable	Sealed
Reference Junction	Single
Refilling Reference Electrolyte	–
Dimensions (Shaft)	90 x 12 mm
Cable Length	1 m
Connector	BNC
Description	General purpose plastic-body ORP electrode
Used With	All pH meters with BNC input connector

Conductivity Electrodes

Specification

Product Specification	Description
Parameter	Conductivity / Temperature
Range	0 to 150 mS
Temperature Range	0 to 80 ºC
Cell	2
Cell Constant	K = 1.0
Cell Material	Stainless steel rings, PP and ultem-body
ATC	Yes
Dimensions (Shaft)	144 x 16 mm
Cable Length	1 m
Connector	BNC & phono plug
Used With	COND 6+ / TDS 6+ / Salt 6+

Dissolved Oxygen (DO) Electrodes

Specification

Product Specification	Description
Parameter	% Saturation of Oxygen, Dissolved Oxygen (DO)
Type	Galvanic
Range	0 to 20 mg/L
Temperature Range	0 to 50 ºC
Response Time	1 min to reach 95 % of final reading
Minimum Sample Flow	2 inch / sec
Maximum Pressure	7.5 bar
ATC	Yes
Dimensions (Shaft)	78 x 16.5 mm
Cable Length	0.9 m
Connector	BNC & phono plug
Description	Galvanic Dissolved Oxygen electrode, epoxy body, Noryl cap/HDPE membrane, ATC. Comes with 2 assembled membrane cap housing, 1 refilling electrolyte & 1 scouring pad
Used With	DO 6+ / DO 700

ATC Probes

Specification

Product Specification	Description
Parameter	Temperature
Temperature Range	0 to 100 ºC
Material	Stainless steel 304
Dimensions (Shaft)	84 x 3 mm
Dimensions (Handle)	85 x 12 mm
Cable Length	1 m
Connector	2.5 mm phono plug
Used With	pH 110 / pH 11 / Ion 6+ / pH 6+ / pH 5+

Temperature Probes

Specification

Product Specification	Description
Parameter	Temperature
Range	0 to 125 ºC
Meter	Thermistor
Dimensions (Shaft)	117 x 3 mm
Cable Length	1 m
Connector	¼ inch phono plug
Description	100 K thermistor Temperature probe, ungrounded, SS304
Used With	EcoScan Temp 5

EC100GTSO20B

Specification

Product Specification	Description
Classification	pH
pH Range	0 to 14
Reference	Annular PTFE, double junction
Reference Electrolyte	Saturated KCl, polymerized gel
Operating Temperature	0 to 80 °C / 32 to 176 ºF
Pressure Tolerance	6 bars (87 psi)
Temperature Sensor	Pt 100
Potential Matching Pin / Liquid Ground	Platinum
Material	PPS (Ryton®)
Thread	¾” NPT
Cable	Integral 20 m (65.6 ft) low-noise semi-conductor screened
Connector	BNC
Dimensions: Length (Excludes Cable)	151 mm
Dimensions: Diameter (External)	26 mm
Weight	950 g

ECHTAUTSO05B

Specification

Product Specification	Description
Classification	ORP
Sensor	Gold
ORP Range	±1000 mV
Reference	Annular PTFE, double junction
Reference Electrolyte	Saturated KCI, polynerized gel
Operating Temperature	0 to 80 °C / 32 to 176 ºF
Pressure Tolerance	6 bars (87 psi)
Potential Matching Pin / Liquid Ground	Platinum
Material	PPS (Ryton®)
Thread	¾” NPT
Cable	Integral 5 m (16.4 ft) low-noise semi-conductor screened
Connector	BNC
Dimensions: Length (Excludes Cable)	151 mm
Dimensions: Diameter (External)	26 mm
Weight	430 g

EC91346S

Specification

Product Specification	Description
Conductivity Range	Up to 500 mS/cm
Cell Constant, K	0.3, 4-cell
Temperature Sensor	Pt100, 3-wire
Pressure Rating at 25 ºC	6 bar (87 psi)
Operating Temperature	-5 to 100 ºC / 23 to 212 ºF
Material	Ryton®, SS316
Fitting Material	–
Thread	¾” NPT
Cable	Integrated 7.6 m (24.9 ft) 8-wire double-shielded, tinned ends
Dimensions: Length (Excludes Cable)	150.5 mm
Dimensions: Diameter (External)	22.2 mm
Weight	430 g

ECCS10001T

Specification

Product Specification	Description
Conductivity Range	0.055 to 20 µS/cm
Cell Constant, K	0.01, 2-cell
Temperature Sensor	Pt100, 3-wire
Pressure Rating at 25 ºC	3.4 bar (50 psi)
Operating Temperature	-5 to 50 ºC / 23 to 122 ºF
Material	Titanium
Fitting Material	Nylon plastic
Thread	½” NPT
Cable	Integrated 7.5 m (24.6 ft) 6-wire double-shielded, tinned ends
Dimensions: Length (Excludes Cable)	168 mm
Dimensions: Diameter (External)	12.8 mm
Weight	600 g

ECDOGENS

Specification

Product Specification	Description
Dissolved Oxygen Range	0.50 to 20 ppm
Type	Galvanic
Flow Rate	50 mm/sec (dependent on temperature and O2 level)
Response Time	40 to 50 sec to attain 95 % of actual reading
Temperature Sensor	Pt100
Pressure Rating	6 bar (87 psi)
Operating Temperature	0 to 50 ºC / 32 to 122 ºF
Material	Delrin housing
Membrane	HDPE
Cable	Integrated 5 m (16.3 ft) water-resistant, tinned ends
Dimensions: Length (Excludes Cable)	152.4 mm
Dimensions: Diameter (External)	58.4 mm
Weight	670 g