• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication
• 24 V DC loop power with mA Measure Mode (-25% to 125%)
• Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
• Simple two wire connection for all measurements
• Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
• Variable step & ramp time in seconds
• Adjustable span selection (0 to 20 mA or 4 to 20 mA)
• Valve Test (simulate defined mA values with % keys)

• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication
• 24 V DC loop power with mA Measure Mode (-25% to 125%)
• Resolution of 1 µA on mA ranges and 1 mV on voltages ranges
• Simple two wire connection for all measurements
• Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
• Variable step & ramp time in seconds
• Adjustable span selection (0 to 20 mA or 4 to 20 mA)
• Valve Test (simulate defined mA values with % keys)

• Fast transfer of calibration data. The 709H/Track software/cable documents the parameters of all the HART transmitters in your plant, in either (.csv) or (.txt) format.
• Data logging or recording data on a particular transmitter for troubleshooting. The data log tool offers selectable capture interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H measurement, all four process variables, and the standard status conditions.

700G Series Precision Pressure Gauge Calibrator

• Nine models ranging from 15 to 10,000 psi
• Bright backlit display for easy viewing of pressure measurements
• Rugged, durable design with protective holster
• High accuracy, 0.05% total measurement uncertainty for one year
• Combined with either the 700PTPK pneumatic pump kit or the 700HTPK hydraulic pump kit for a complete measurement and testing solution
• Demand measurement logging to a PC or to internal memory with 700G/TRACK software
• Work safely in classified areas known to include explosive gasses;
  • CSA: Class 1, Div2, Groups A-D rating
  • ATEX: rating II 3 G Ex nA IIB T6
• Three-year warranty promises long term value for the investment

Fluke-700PTPK Pneumatic Test Pump Kit

• Generates pressure up to 600 psi
• Connects directly to the 700G series pressure test gauges
• Use kit with 700PXX pressure modules and 71x calibrators
• Includes hoses and adapters for connecting to the pressure device to be tested
• Hard case provided for easy, protective transportation of the gauge or 717 and the pump kit

Fluke-700HTPK Hydraulic Test Pump Kit

• Generates pressure up to 10,000 psi
• Connects directly to the 700G series pressure test gauges
• Use kit with 700PXX pressure modules and 717 calibrators
• Includes hose kit and adapters for connecting to the pressure device to be tested
• Hard case provided for easy, protective transportation of the gauge or 71x and the pump kit

700G/TRACK logging software

• Use with the 700G series gauges to perform real time data logging to a PC
• Download logging configurations to the 700G series gauges for a remote logging event
• Configure logging event reading rate, duration and measurement units
• Upload measurements logged remotely and display or export measurements
• Includes communication cable for connection to a PC

• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Power transmitters during test using loop supply with simultaneous mA measurement
• Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
• Holds up to a full week of downloaded procedures and calibration results.
• Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
• Easy to use
• Three year warranty
• Bright white dual display. Read both sourced and measured parameters simultaneously.
• Multi lingual interface
• Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
• Delivered with DPC/Track Sample software.
• Compatible with many Asset Management software packages.

• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Power transmitters during test using loop supply with simultaneous mA measurement
• Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
• Holds up to a full week of downloaded procedures and calibration results.
• Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
• Easy to use
• Three year warranty
• Bright white dual display. Read both sourced and measured parameters simultaneously.
• Multi lingual interface
• Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
• Delivered with DPC/Track Sample software.
• Compatible with many Asset Management software packages.

• More precise measurement and calibration source performance, accuracies of 0.01%.
• Two separate channels; measure, source and view process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
• Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
• Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
• Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
• Transmitter error% calculation, interpret calibration results without a calculator
• Perform fast linearity tests with auto step and auto ramp features
• Power transmitters during test using 24 V loop supply and simultaneous mA measurement
• Store frequently-used test setups for later use
• Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
• HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
• Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
• New voltage input protection design for improved reliability
• Three-year warranty

• Electric pump for one handed pressure calibration
• Best in class pressure measurement uncertainty of 0.025%
• Measure and source mA with best in class 0.015% accuracy
• Precision pressure adjust vernier for accurate pressure calibration
• Variable release rate bleed valve for easy pressure adjustment
• Ideal performance for high accuracy transmitter calibration
• 30 PSI and 100 PSI pressure ranges
• Programmable pressure calibrator pump limit:
  • eliminates over-pressurization
  • allows the user to program target pressures for pumping
• Extended pressure measurement range with any of 29 700Pxx Pressure Modules
• Source mA with simultaneous pressure measurement to test valves and I/Ps
• Simulate mA signals to troubleshoot 4-20 mA loops
• Test pressure switches with built in switch test function
• Power transmitters during test using 24 V loop supply with simultaneous mA measurement
• Pressure Calibrator includes proven cleanout ports reduce pump failures

The 773 mA Clamp Meter features:

• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without ”breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements
• Measure 4 to 20 mA signals with in-circuit measurement
• Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
• Source 4 to 20 mA signals for testing control system I/O or I/Ps
• mA output linear ramp or 25% step output
• Automatically change the 4 to 20 mA output for remote testing
• DC voltage measurement to verify 24V power supplies or voltage I/O signals
• Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
• Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
• Enables milliamp signal logging to a separate logging device without breaking the loop
• Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
• Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
• Voltage output linear ramp or 25% step output
• Automatically change the voltage output for remote testing

• 24 V Loop power supply
• Very large dual display
• Enhanced backlight with 2 brightness settings
• 1200 ohm drive capability on mA source
• HART mode setting with loop power and a built-in 250 ohm resistor
• 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
• Externally accessible fuses for easy replacement
• Infrared-port to process data in FlukeView Forms (V2.1) software

• Precision 1000 V, 440 mA True-RMS digital Multimeter
• 0.1% dc voltage accuracy
• 0.05% dc current accuracy
• Frequency measurement to 20 kHz
• Min/Max/Average/Hold/Relative modes
• Diode Test and Continuity Beeper
• Simultaneous mA and % of scale readout
• 20 mA DC current source / loop calibrator / simulator
• Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
• Externally accessible battery for easy battery changes