• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design
• Automatic shutdown
• Battery is easy to replace

• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Data hold

• Voltage, resistance, continuity, capacitance
• Input terminal for ac and dc current measurements to 10 A and current
• Backlit display
• Data hold
• Diode test, plus frequency and duty cycle measurements

• AC and DC voltage measurements to 1000V
• AC and DC current with 0.01 mA resolution
• Continuity, resistance, diode test, capacitance and frequency measurements
• MIN/MAX Recording
• CAT III 1000 V, Cat IV 600 V; IP54

Plus, the CNX wireless enabled modules measure AC voltage, AC current and temperature, which display on the CNX Wireless Multimeter. Choose a standard clamp or flexible clamp to measure AC current. Mix and match modules to suit your unique measurement needs. Read the primary measurement on the main display, and up to three modules at any one time. Modules are available separately or as part of CNX kits.

• True-RMS AC voltage measurements to 1000V
• ±1% accuracy to 500 Hz, ± 2% accuracy to 1 kHz
• Memory recording up to 65,000 readings
• Backlit LCD display
• CAT IV 600 V, CAT III 1000 V; IP42

The CNX wireless system can track up to 10 measurement modules simultaneously, with results sent to a PC for detailed analysis.

The Fluke 28 II Ex is the most rugged IS DMM you can buy.

• A completely sealed, IP67 rated case
• Withstands drops up to 10 feet or 3 meters (with holster)
• Dustproof per IEC60529 IP6x
• Waterproof per IEC60529 IPx7
• Meets IEC Overvoltage Electrical Safety Standard No. 61010-1:2001
  • Measurement Category III, 1000V, Pollution Degree 2
  • Measurement Category IV, 600V, Pollution Degree 2
• Reversible holster for added protection of the display when not in use

• Basic dc accuracy
• Digital display to 4,000 words
• Automatic and manual range
• Display hold function
• Diode and continuity test with buzzer
• Cover designed for easy hanging
• Category safety rating: IEC 1010-1: CAT I 1000 V, CAT II 600 V, CAT III 300 V
• Automatic shutdown
• Easily replaceable battery design
• One-year warranty
• 500 hours battery life
• Voltage AC, Voltage DC, resistance, capacitance, continuity beeper, diode test, A ac, A dc all in a durable holster
• Rugged and durable design – all inputs, ranges and functions are protected up to 1000 V
• Batteries and users manual included

• Temperature (°C)
• Frequency and duty cycle
• Relative mode
• Basic dc accuracy
• Digital display to 4,000 words
• Automatic and manual range
• Display hold function
• Diode and continuity test with buzzer
• Cover designed for easy hanging
• Category safety rating: IEC 1010-1: CAT I 1000 V, CAT II 600 V, CAT III 300 V
• Automatic shutdown
• Easily replaceable battery design
• One-year warranty
• 500 hours battery life
• Voltage AC, Voltage DC, resistance, capacitance, continuity beeper, diode test, A ac, A dc all in a durable holster
• Rugged and durable design – all inputs, ranges and functions are protected up to 1000 V
• Batteries and users manual included

• True-rms ac voltage and current for accurate measurements on non-linear signals
• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 µF capacitance range
• Frequency to 50 kHz
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Resistance, continuity and diode test
• Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements
• The removable magnetic display can be conveniently mounted where it is easily seen
• Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements
• Use as a conventional multimeter when the display is connected
• Radio transmitter automatically turns off when the display is connected to the meter
• Auto power off maximizes battery life
• Min/Max and Average recording to capture variations automatically
• Test continuity and diodes
• Easy to read display with large digits and bright backlight
• Battery life approximately 400 hours

• NEW – Large 50,000 count, ¼ VGA display with white backlight. Multiple sets of measurement information can simultaneously displayed at the same time.
• NEW - Logging function with TrendCapture is an essential tool for documenting the performance of your designs, processes or systems, monitoring unattended while you work on other projects. It plots measurements as a single line to help detect signal anomalies over time, storing up to 10,000 readings. Using on-board TrendCapture, you can graphically view logged readings without a PC. (Software and interface cable optional).
• NEW – Log multiple sessions or log data continuously for over 200 hours. This is useful for characterizing the performance of a design or for unattended monitoring.
• NEW - i-info button on board help screens for measurement functions. Unsure about a function? Go to that function and Press the “i button.
• NEW – LoZ Volts. Low impedance voltage function prevents false readings due to “ghost voltage. It is also the recommended mode when testing for absence or presence of live power.
• New – Low Pass Filter for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment.
• 50 ohm range – useful for measuring and comparing differences in motor winding resistance, low ohm measurements, or other contact resistance. Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current.
• NEW – Saved measurements allow you to name and recall measurements made in the field
• Real Time Clock – for automatic time stamping of saved readings
• NEW - Field upgradeable and expandable meter lets you stsay current as new capabilities are added
• NEW - Multi-lingual interface
• Min/Max/Average with Time Stamp to record signal fluctuations
• Soft keys, scroll buttons and easy navigation control access to secondary functions. Create custom displays too.
• 0.025% Basic DC accuracy
• 100 kHz ac bandwidth
• True-rms ac voltage and current for accurate measurements on complex signals or non-linear loads.
• Measure up to 10A (20 A for 30 seconds; 10A continuous)
• 100 mF capacitance range
• Temperature function
• Relative mode to remove test lead resistance from low ohms or capacitance measurements
• Peak capture to record transients as fast as 250 µs
• Premium test leads and alligator clips included
• Optical USB PC communication interface allows for easy PC download to document logged data with FVF software (not included).
• Optional FlukeView forms enables you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents
• Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.
• Limited lifetime warranty
• CAT III 1000 V / CAT IV 600 V safety rated

• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True-rms for accurate measurements on non-linear loads
• Measures 10 A (20 A overload for 30-seconds)
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™) for hands free operation
• CAT III 600 V safety rated

• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 µF capacitance range
• Frequency to 200 kHz
• Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
• Resistance, continuity and diode test
• Min/Max and average recording to capture variations automatically
• Peak min-max (28 II)
• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (28 II)

• New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
• Designed to withstand 3 meter drop (with holster)
• Hi resolution 20,000 count display mode (28 II)
• True-rms ac voltage and current for accurate measurements on non linear signals (28 II)
• Average responding voltage and current for measurements (27 II)
• New – Backlit keypad buttons allow for easy visibility in lowlit areas
• Large display digits and 2 level bright white backlight for increased visibility
• Reversible holster for added protection when not in use
• Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
• Long battery life (800 hours)
• Relative mode to remove test lead resistance from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
• MSHA approval